Machines

ABB IRB 2400/16 Type B - M2004

well-kept robot, usable immediately

Millutensil BV 26

neat condition, little used

Fähe MSV1.1

Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed onto 2 or more square timbers using wood screws. Please check the ladder dimensions to make sure everything will fit. To assemble you will need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend an additional trunk support.

KEMPER

2 pcs. flexible suction arms, length 3 m, without wall mounting / Suspension

Thermal Technology 1000-4560-FP-20

High-temperature sintering furnace, max. temp. in argon approx. 1700 °C, in helium up to 2275 °C, the furnace was used for student/scientific purposes; the heating element is made of graphite and the oven was used for sintering ceramic components.

Interkern TB-20 / 5E

Drill chuck - 16 mm, well-maintained machine, little used

Rische + Herfurth Polystar 601M

Heating element opening 15 mm, weld seam length 600 mm, passage width 525 mm, weld seam width 3 mm

Valmet 1506-A12533

- Tires: pneumatic, engine: Perkins, 6.354 Series 1000 - Lift height: 3.2 m - Load center: 15 t / 600 mm - Forks: 1.6 m (160 x 85 mm),- Forks: min. inside: 230 mm, outside: 550 mm - Max. fork adjustment: between forks: 1890 mm - Max. fork adjustment: outside on forks: 2210 mm - Tank capacity: 200 liters

ELB-SCHLIFF PERFEKT BD 15 NPC-K

Travel distances 1575 x 560, overhauled by Wema Service in 2012

HERMLE UWF 720

under power, ready for inspection

BEHRINGER HPB 320

on wheels, column-guided, good condition, ready to use

Hyster H150F

PEHAKA HS340

semi-automatic operation, robust machine, good condition, ready to use

THIEL Segura 118

Table can be swiveled in all directions, 3 gear levels/speeds - in the individual levels, controllable speed setting

BERG + SCHMID

BERG + SCHMID

Height adjustable, 3 pieces available, height 0.94 m

Kreuzer

measuring table respectively laboratory table with a granite plate and a thereon permanently bonded aluminium plate with base frame, aluminium plate with threaded holes M8, hole spacing 50 mm

SCHÄFER PR 600

LOEWE

3R 3Refix 3R-935-56.40 02

Reference table/Clamping field, holes with M12 thread, bores diameter 16/12 m, bores diameter 11/18 mm, No. 3R-935-56 02, SN 400 100

RÖHM

hight 105 mm, mounting via 4 x M12, hole distance 95 mm, outlet 55 mm

MITUTOYO B-706

complete set transport cecurity for coordinate measuring machine B-706, device can be rented against deposit amount of 1000 Euro.

GMN TSAV 160 x 630

Machine spindle for belt drive and direct drive, 2500 rpm, overhauled in 03/03 and no longer used, original packing from GMN, serial no. 280217, used, in full function

Ludwig & Fries